Wilson W5000 TRK 49" Black Center Load Trucker Antenna
  Loading... Please wait...


Wilson W5000 TRK 49" Black Center Load Trucker Antenna

Hover over image to zoom

  • Image 1
RRP: $120.99
$87.99 (You save $33.00)
in stock
Calculated at checkout

 Product Description

The Wilson 5000 Trucker CB antenna was shown to have the highest "Q" rating of all antenna coils tested. The "Q" is the standard engineering measurement of efficiency of the antenna coil. The higher the "Q", the higher the efficiency, which means higher performance from that antenna.

The higher rating for the Trucker 5000 coil is a result of proper engineering practices, such as the correct length-to-diameter ratio for the wire size, and a silver plated 3/16" solid copper wire in manufacturing the loading coil.

Extensive research, development and engineering efforts showed that a silver plated 3/16" solid copper wire displayed better performance characteristics and lower losses, giving more power gain, than that of chrome plated hollow tubing. Copper is one of the best RF conductors available - silver is even better. Wilson combined the best of both worlds by choosing 100% pure silver for heavy duty plating of the large solid copper wire.

This combination provides better efficiency and higher performance properties, thereby giving more power gain than any 1/4" or 3/8" chrome plated tubing antenna coil.

The special design of the Trucker 5000 floating coil will not ice up and stop working or break, even in severe winter conditions. This means that using Wilson's design techniques, the 5000 Trucker will not ice up and short out the windings as is possible with the open coil designed antennas. The highly engineered thermoplastic cover protects the coil from the harsh environmental conditions encountered on the open road. A dirty antenna coil can measurably cut the performance characteristics of that antenna, and one that is covered with ice can cut the performance by as much as 50%.

The Trucker 5000 is available with your choice of shaft lengths of 5" or 10", and mounts into a standard 3/8" X 24" threaded mount. Due to the increased torque applied to the mount with the Trucker 5000, it is recommended that only a stainless steel stud mount be used with the Trucker 5000. ( NOTE: The 18" or 22" shaft should not be used with this antenna, as the increased torque will snap the mounting stud, and you could loose the antenna. )

The Trucker 5000 was designed specifically for users who want the best in a high performance antenna with the ability to withstand some serious power. The Wilson 5000 Trucker handles 5000 watts AM, 20,000 watts SSB (ICAS rating).

Wilson's attention to detail, engineering quality and designs are what helps make the antenna perform so well. The strength of performance and power handling capabilities of the antenna will prove themselves the first time extra power is needed to break through noise and congestion on the air. 49" Stainless steel whip Rated at 5000 watts Standard 3/8" x 24 chromed brass ferrule Larger coil housing allows for increased power handling A patented low loss, air wound coil design Uses 10 gauge silver plated wire Coil is made of high impact engineered thermoplastic Frequency range is from 26 MHz to 30 MHz Static reducing weather cap Clamshell


 Find Similar Products by Category

 Product Reviews

  1. Very sensitve RX

    Posted by gibgib on 1st Jun 2014

    I replaced a Sirio antenna on my mobile with a Wilson 5000 & have noticed an increase in RX, (but also other unwanted noise). It brings in far away stations much better than before & was easy to tune with the allen key adjustment.
    I bought this when purchasing my DX1600 from Jason @ Jokerman Electronics & can highly recommend him with your order, whatever it is, even internationally as I am.

You Recently Viewed...


What's News


Copyright 2019 Jokerman Electronics. All Rights Reserved.
 Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Wilson W5000 TRK 49" Black Center Load Trucker Antenna to your wish list.